Comments:
<pre>-----------------------------------------------------
[SEAGATE ST31500341AS |1,5TB|32MB Cache|7200RPM]
-----------------------------------------------------
>>>>>>>>>>>>> Drive model : ST31500341AS <<<<<<<<<<<<
-----------------------------------------------------
THESE ARE LEGIT FIRMWARES FOR THIS DRIVE AND THEY
BEEN TESTED AND WORKING FINE!
There are some serious problems with early shipped
Seagate 1,5TB drives , model # ST31500341AS , with
early firmwares. So here are 2 .ZIP files with
updated firmwares for it's drive with different FW
listed further below.
The steps are simple:
- To make a bootable floppy-diskette then run the
.EXE file and insert a empty floppy disk.
- To make a bootable CD-ROM then burn the .ISO image
to a CDR.
Either way, you need to reboot your PC with the
bootable madia inserted then follow directions by
the flash tool when booted.
READ carefully the FWReadMe.txt files found in the
ZIP files.
I RECOMMEND YOU REMOVE OTHER DRIVES CONNECTED TO YOUR
MOTHERBOARD/CONTROLLER AND KEEP ONLY THE DRIVE YOU
WANT TO UPDATE CONNECTED!
-----------------------------------------------------
IF YOUR DRIVE LABEL IS :
P/N : 9JU138-301
Firmware : CC1F, CC1G
- You should update to
Firmware: CC1H or later.
USE : ST31500341AS_CC1H.ZIP
-----------------------------------------------------
OR IF YOUR DRIVE LABEL IS :
P/N : 9JU138-300 ,366
Firmware : SD17, SD15, SD18
- You should update to
Firmware: SD1A
USE : ST31500341AS_SD1A.ZIP
-----------------------------------------------------
[SEAGATE ST31500341AS |1,5TB|32MB Cache|7200RPM]
-----------------------------------------------------
DO NOT TRY THIS IF YOU DON'T KNOW WHAT YOUR ARE DOING!
GOOD LUCK!
/ Wackopath </pre>
External comments